ISO 9001:2015 Stockist & Fabricator | Sharjah HQ Stockyard | Abu Dhabi Branch
Leema Engineering Works

Barred Tee Manufacturer UAE: Barred Tee Fabrication for Piggable Pipelines

Leema Engineering Works is a barred tee manufacturer UAE pipeline contractors and operators use for pigging tees built to their datasheet. We manufacture barred tees in carbon steel, low temperature carbon steel and stainless steel in our Sharjah workshop [confirm], from ASME Class 150 to 2500 [confirm], with guide bars for tees designed to your pig type and branch size. Every tee is welded by qualified welders, tested and documented. Send your datasheet and our engineers return a drawing, a price and a lead time.

What Is a Barred Tee?

A barred tee is a pipe tee with steel bars welded across the branch opening, so a pig running along the main line passes the branch instead of turning into it or jamming. It is also called a pigging tee, a guided tee or a scraper tee. The bars sit flush with the bore of the run pipe and leave the branch open for flow. Choosing a barred tee manufacturer UAE operators already accept matters, because the tee becomes part of the pressure boundary of the line. A local barred tee maker can also be audited on site, turn drawing changes around in days and add In-Country Value to your project.

At a glance, here is what our barred tee fabrication covers.

  • Base tee: seamless or welded tee to ASME B16.9 or MSS SP-75, or a fabricated tee for large sizes.
  • Bars: flat bars or a slotted guide sleeve, matched to the tee material.
  • Ends: bevelled for butt welding, or flanged with RF or RTJ faces on request.
  • Service: sweet and sour gas, crude oil, water injection and product lines on any piggable pipeline.
  • Documents: drawing, weld map, NDT reports, hydrotest record and EN 10204 3.1 certificates.

Design Inputs We Need

A barred tee manufacturer UAE projects can rely on starts with the right data, not the welding torch. These inputs let our barred tee manufacturing team size the bars and confirm the barred tee design before we cut any steel.

  • Run and branch size, with wall thickness or schedule for each.
  • Design pressure, design temperature and the governing pipeline code, usually ASME B31.4 for liquids or ASME B31.8 for gas.
  • Material grade of the connecting pipe, plus any sour service or low temperature requirement.
  • Pig type, including whether intelligent pigging tools will run through the line, since inline inspection tools need a smoother passage than cleaning pigs.
  • Project specification, such as an operator pigging tee specification or Shell DEP, which can set the bar layout.

If you only have a line list or a barred tee datasheet from the client, send that. We fill the gaps with questions, not assumptions.

Barred Tee Manufacturer UAE: Sizes, Classes and Materials

Barred tees made in the UAE by Leema are built to order, so the range below is our working envelope, not a stock list. As a barred tee manufacturer UAE clients approve against their own specification, we confirm every limit on the drawing before fabrication starts.

  • Sizes: run sizes from [confirm, e.g. NPS 4] to [confirm, e.g. NPS 48], with equal or reduced branches. For larger sizes we manufacture barred tees from plate or pipe.
  • Pressure classes: ASME Class 150 to 2500 [confirm], with wall thickness matched to the line pipe so the bore stays aligned for the pig.
  • Carbon steel: ASTM A234 WPB tees and high-yield tees to MSS SP-75 in WPHY 42 to WPHY 70 grades to match API 5L line pipe.
  • Low temperature carbon steel: ASTM A420 WPL6 for cold service.
  • Stainless steel: ASTM A403 WP316L for corrosive or clean service.
  • Duplex and other alloys: on request [confirm].

Bars match the tee material, so weldability and corrosion resistance stay consistent. For a sour service barred tee, both tee and bars meet NACE MR0175 hardness limits, and we record hardness after welding.

Barred Tee Fabrication: Bar Design and Welding

Good barred tee design is about the pig, not only the pressure. Bar spacing must be narrow enough that no cup, disc or sensor can drop into the branch, yet the open area must still carry the full branch flow without excess pressure drop. It is where a specialist barred tee manufacturer UAE contractors trust earns its place over a general fabricator.

How we manufacture barred tees, step by step:

  • Bar layout: The number of bars rises with branch size. Two bars suit small branches; larger branches take more bars, and tees from about 14 inch upward usually get a bridge plate across the middle for stiffness.
  • Machining: Bar ends are machined and ground to follow the inside curve of the run pipe, so the pig sees one smooth bore.
  • Welding: As barred tee manufacturers we weld bars to the branch neck, away from the high-stress crotch of the tee, using approved WPS and PQR procedures and ASME Section IX qualified welders.
  • Finishing: Spatter, burrs and sharp edges are removed so intelligent pigging tools are not damaged.
  • Heat treatment: Post weld heat treatment is applied when wall thickness, material or the client specification calls for it.

No weld repair is made on parent metal without client approval.

Where Barred Tees Are Used

Any piggable pipeline with a branch large enough to catch a pig needs one. Barred tees in the UAE are specified onshore and offshore, and we manufacture barred tees for both. Typical uses include branch connections on export and transfer pipelines, station headers next to launchers and receivers, and subsea or onshore tie-ins on oil and gas fields.

They often sit beside pig launchers and receivers, and on our oil and gas industry page you can see how they fit into a full pipeline package. Contractors on these lines often prefer a barred tee manufacturer UAE close to site, so late changes and spares are handled in days, not weeks.

When Do Specifications Require a Barred Tee?

Settle it at design stage, not after a pig gets stuck.

Most pipeline specifications call for guide bars for tees when the branch is large compared with the run. A common rule is that bars are needed once the branch diameter reaches about half the run diameter or more, but the client specification always sets the exact ratio, so check it first. Every barred tee manufacturer should confirm this before quoting.

Three points decide what a barred tee manufacturer must build:

  • The pig: Intelligent pigging tools are longer and carry sensors, so many operators require bars at smaller branch ratios than for cleaning pigs.
  • The code and operator: Gas lines to ASME B31.8 and liquid lines to ASME B31.4 do not set bar rules themselves; the operator specification does. ADNOC, for example, issues its own pipeline pigging tees specification.
  • The service: A sour service barred tee needs hardness control on every weld, which affects the bar design and heat treatment.

If you are unsure whether a branch needs a pigging tee, send the line data and our team, as a barred tee manufacturer UAE projects consult early, will give a written view before you order.

Inspection, NDT and Documents

Inspection is where a barred tee manufacturer UAE buyers can audit proves its work. Every tee leaves the workshop with proof that it was built and tested as drawn.

  • Visual and dimensional checks against the approved drawing and MSS SP-75 or ASME B16.9 tolerances, including bar position and bore alignment.
  • Radiographic testing or ultrasonic testing on butt welds, and magnetic particle or dye penetrant testing on bar welds [confirm methods].
  • Hardness testing for sour service, and PMI on alloy tees.
  • Hydrostatic test where the specification requires it.
  • Document pack: drawing, weld map, WPS and PQR, welder qualifications, NDT and radiographic testing reports, heat treatment charts and EN 10204 3.1 material certificates. Third-party inspectors are welcome at any hold point in our barred tee manufacturing.

Recent Jobs

[Confirm and replace with authorised references.] Job 1: [size and class] barred tee in [material] for [end user or EPC], [year], built to [operator] pigging tee specification with full radiographic testing. Job 2: [quantity] sour service barred tees for [project], with post weld heat treatment and hardness testing.

ADNOC In-Country procurement documents have listed barred tees as a pipeline product with local manufacturing potential. Choosing a barred tee manufacturer UAE operators can visit supports In-Country Value goals and cuts the lead time of importing tees from Europe or Asia.

Lead Time and Delivery

As a barred tee manufacturer UAE projects order from directly, our typical lead time is [confirm] weeks from drawing approval, depending on size, material and testing. Tees are delivered locally within days of release and shipped to GCC projects with export documents.

Related Pages

Other services from our barred tee manufacturer UAE workshop: Pig Launcher and Receiver Fabrication, our Fabrication and Engineering Services overview, Oil and Gas, and Flanges for flanged-end tees.

Barred Tee Manufacturer UAE FAQs

What is the difference between a barred tee and a standard tee?
A standard tee has an open branch. A barred tee adds guide bars for tees across the branch so pigs pass straight through.
Do barred tees cause pressure drop?
A little. Correct bar spacing keeps the open area large enough for the branch flow.
How is bar spacing chosen?
A barred tee manufacturer sets it from the pig type and branch size. The gap must be smaller than the smallest pig element that could enter it.
Do you manufacture barred tees for sour service?
Yes, with NACE MR0175 hardness limits on tee, bars and welds, and post weld heat treatment where required.
Do you manufacture barred tees with flanged ends?
Yes, with RF or RTJ flanges welded on, or bevelled ends for butt welding.
Why use a barred tee manufacturer UAE projects can visit instead of importing?
Shorter lead time, drawing changes in days and witness inspection without travel, and local work counts toward In-Country Value.
Who signs off the barred tee design?
Our engineers, as the barred tee manufacturer, prepare the drawing and calculation; your engineer or the operator approves it before we cut steel.

Send Your Barred Tee Datasheet

Upload your barred tee datasheet, drawing or line list and our barred tee manufacturing team replies with a drawing, price and lead time within [confirm] working days. Call +971 6 533 8167, WhatsApp [confirm number] or email sales@leemaeng.com. You can also use the Request a Quote page.

Request a Fabrication Quote Call +971 6 533 8167
Reviewed by [Engineer name], [Role], Leema Engineering Works. Last reviewed [date].