Orifice Flange Assembly UAE: Orifice Flanges With Jackscrews, Plates and Taps
Leema Engineering Works supplies the complete orifice flange assembly UAE instrument engineers and EPC contractors need for differential pressure flow measurement. Each set is built to ASME B16.36 and arrives ready to weld into your meter run: a matched pair of weld neck orifice flanges, an orifice plate, flange taps, jackscrews, gaskets and stud bolts [confirm which items are supplied]. Assemblies come in carbon, low temperature and stainless steel, in classes 300 to 2500, with material certificates for every part. Send your instrument datasheet and our team returns a price and lead time.
What Is in an Orifice Flange Assembly?
An orifice flange assembly is a pair of thick flanges that clamp an orifice plate in the pipe, with drilled pressure taps on each side of the plate. A transmitter reads the pressure drop across the plate, and that differential pressure gives the flow rate. Choosing an orifice flange assembly UAE stock can supply quickly keeps instrument hook-ups on schedule, because flanges, plate and bolting arrive as one matched set.
A full assembly usually includes:
- Orifice flanges: Two weld neck orifice flanges to ASME B16.36, thicker than standard flanges so the taps can be drilled through the rim.
- Flange taps: Two tapped holes per flange, normally 1/2 inch NPT taps, set 1 inch from each face of the plate.
- Orifice plate: A concentric square-edged paddle plate as standard, sized for your beta ratio.
- Jackscrews: Two jackscrews that push the flanges apart so the plate can be removed without cutting the line.
- Gaskets and bolting: Gaskets to suit the flange facing, with full stud bolts and nuts.
- Plugs and accessories: Tap plugs, and alignment pins where required.
Buying an orifice flange with jackscrew, plate and taps as one tested set saves the site from matching parts from three suppliers.
What to Send for a Quote
For orifice flange assemblies, a complete instrument datasheet gives the fastest and most accurate price. Every orifice flange assembly UAE engineers order from us starts with this data. If you do not have one, these details are enough to start.
- Line size and schedule, so the bore of the orifice flange assembly matches the pipe.
- Pressure class, facing and material, including any sour service or low temperature needs.
- Plate details: bore, beta ratio, thickness, material and plate type, or the flow data for sizing.
- Tap details: number of taps, size, thread type and orientation.
- Quantity, project specification and required delivery date.
- For a complete meter run, the upstream and downstream straight lengths so we can supply straight pipe welded on [confirm].
If the plate bore has not been calculated yet, tell us the fluid, flow range and line conditions; our engineers can coordinate plate sizing to ISO 5167 [confirm]. Plate sizing to ISO 5167 or AGA Report No. 3 depends on accurate flow data.
Orifice Flange Assembly UAE: ASME B16.36 Classes, Sizes and Materials
ASME B16.36 sets the dimensions of orifice flanges. Every orifice flange assembly UAE projects order from us is built within its limits.
- Pressure classes: 300, 600, 900, 1500 and 2500. ASME B16.36 does not cover Class 150, so Class 150 lines normally use Class 300 orifice flanges.
- Sizes: NPS 1 to 24 [confirm stocked range].
- Types: weld neck orifice flanges in all classes, with slip-on and threaded types in Class 300 only.
- Facings: raised face or ring-type joint, with the orifice plate held between the gaskets.
- Carbon steel: ASTM A105.
- Low temperature carbon steel: ASTM A350 LF2.
- Stainless steel: ASTM A182 F304L and F316L, with duplex F51 on request [confirm].
Orifice plates are usually stainless steel 316 whatever the flange material, because the sharp bore edge must not corrode or wear. Bore of the weld neck orifice flange is matched to the pipe schedule so there is no step to disturb flow measurement. Paddle plates are cut to the same ASME B16.36 class so the handle sits clear of the bolts. Most orifice flange assemblies we ship are Class 300 and 600 carbon steel [confirm].
Plates, Taps and Jackscrews
Measurement accuracy depends on how well the parts fit together, not only on each part. This is where an orifice flange assembly UAE buyers can trust differs from loose parts.
- Orifice plate: Paddle plates are cut and machined to the calculated bore with a sharp, square upstream edge, then marked with bore, beta ratio, material and tag number on the paddle handle. Flatness and edge condition are checked against ISO 5167 limits before assembly [confirm].
- Flange taps: NPT taps are drilled square to the bore and deburred inside, so no burr distorts the pressure reading. Taps are positioned opposite each other, normally horizontal for liquid and gas lines [confirm orientation practice].
- Jackscrews: Each orifice flange with jackscrew has two hardened screws set 180 degrees apart. Turning them spreads the flanges evenly, which protects the gasket faces during plate inspection.
- Alignment: Flanges in orifice flange assemblies are matched as a pair, marked together and, where required, fitted with alignment pins so bores line up after welding.
- Assembly: Each orifice flange assembly is bolted and checked against the datasheet before packing, then shipped with the plate protected.
Where Orifice Flange Assemblies Are Used
Orifice meters remain one of the most common ways to measure flow because they are simple, robust and well documented. You will find orifice flange assemblies on natural gas and fuel gas lines, crude and condensate flowlines, steam and boiler feedwater systems, cooling water, and chemical dosing lines in refineries, power plants and desalination plants. They are also used for flow checks during commissioning and for allocation metering on oil and gas fields. Most orifice flange assembly UAE orders we see are for gas and steam lines at oil, gas and utility sites [confirm]. Each one forms part of a meter run that also needs straight pipe upstream and downstream.
Orifice Flange Assembly or Orifice Fitting: Which Do You Need?
This is the decision buyers most often get wrong. Both hold an orifice plate, but they work differently.
- Orifice flange assembly: The plate is changed by venting and draining the line, loosening the bolts and spreading the flanges with the jackscrews. It costs far less and suits process lines that can be isolated for a short time.
- Single-chamber orifice fitting: A one-piece body lets the plate be lifted out more easily, but the line still needs isolating.
- Dual-chamber orifice fitting: The plate can be removed under pressure without stopping flow. It is used mainly for custody transfer and other critical metering where shutdown is not possible, at a much higher price.
A simple rule: if the line can be isolated for plate inspection and is not used for custody transfer, an orifice flange assembly is usually the right and lower-cost choice. If you are unsure, send the line data and our orifice flange assembly UAE team will recommend the option that fits your process.
Inspection, Testing and Documents
Every orifice flange assembly UAE customers receive is checked before it leaves our warehouse.
- Dimensional check of flanges against ASME B16.36, including tap position and bore.
- Plate inspection: bore measurement, flatness and upstream edge condition.
- Thread check on NPT taps and jackscrews, with differential pressure taps cleaned and plugged for shipping.
- Material certificates: EN 10204 3.1 for flanges, plates and bolting.
- Hardness testing for sour service and PMI on stainless parts on request.
- Document pack: issued with all orifice flange assemblies, covering the datasheet, plate calculation sheet if supplied, dimensional report and certificates. Third-party inspection is welcome before dispatch.
Recent Jobs
[Confirm and replace with authorised references.] Job 1: [quantity] orifice flange sets, Class [class], [material], for [end user or EPC], [year]. Job 2: replacement plates and jackscrews for an existing gas metering skid at [location]. Both jobs were supplied as complete sets, the standard for every orifice flange assembly UAE contractors order from us.
Lead Time and Delivery
Standard carbon steel orifice flanges are held in stock [confirm]; complete assemblies with plates typically ship in [confirm] working days. Assemblies are delivered across the UAE and shipped to GCC projects with export documents. For urgent orifice flange assembly UAE orders, tell us your hook-up date and we will confirm stock before you order.
Related Pages
See Flanges for standard ASME flanges, Custom and Non-Standard Flanges for special sizes, and our Fabrication and Engineering Services overview.
Orifice Flange Assembly UAE FAQs
What is the difference between an orifice flange and a standard weld neck flange?
Why is there no Class 150 orifice flange?
How often should the orifice plate be inspected?
Can you supply orifice plates only?
Do you supply the jackscrews separately?
What flow measurement accuracy does an orifice flange assembly give?
Can orifice flange assemblies be used for custody transfer?
Can the taps be socket weld instead of threaded?
Request an Orifice Flange Assembly Quote
Upload your instrument datasheet or line list and our team replies with a price and lead time within [confirm] working days. Call +971 6 533 8167, WhatsApp [confirm number] or email sales@leemaeng.com. You can also use the Request a Quote page.