Alloy Steel Pipe Supplier UAE: ASTM A335 P11, P22 and P91 Pipes
Leema Engineering Works is an alloy steel pipe supplier UAE engineers use for seamless chrome-moly pipe to ASTM A335 P11, P22 and P91. We supply it from non-China mills [confirm] with EN 10204 mill certificates, heat numbers and positive material identification, from our Sharjah and Abu Dhabi warehouses. This page covers the grades, sizes, applications and the checks that matter when you specify alloy pipe for steam lines and high-pressure process service. Send your material take-off with grade, size and schedule, and we will quote price, availability and lead time.
Alloy Steel Pipe Supplier UAE at a Glance
Chrome-moly pipe is seamless ferritic alloy steel made for high-temperature service, where plain carbon steel loses strength or scales. ASTM A335 is the governing specification, and the grade you pick sets the chromium, molybdenum and creep strength. As an alloy steel pipe supplier UAE projects rely on, our team supports engineers, procurement staff and maintenance planners who need seamless alloy steel pipe with a clear paper trail, and each quotation states the exact standard, grade and edition for every line. The table summarises the range, and the sections below explain how to choose between grades, check sizes and verify what arrives on site.
| Specification | ASTM A335 (ASME SA-335), seamless |
| Core grades | P11, P22, P91 |
| Other grades | P5, P9 on enquiry [confirm] |
| Sizes | [confirm size range] NPS |
| Dimensions | ASME B36.10M |
| Certificates | EN 10204 3.1; 3.2 on request |
| Origin | Non-China mills [confirm] |
| Lead time | Confirmed in the quotation |
ASTM A335 Grades We Stock
ASTM A335 P11, P22 and P91 cover most UAE enquiries. A335 P11 pipe and A335 P22 pipe are the established chrome-moly steels for steam and process lines, with P22 carrying more chromium and molybdenum for higher temperature and hydrogen-bearing duty. A335 P91 pipe is the modified 9Cr-1Mo-V steel chosen where creep strength allows thinner walls and lighter headers. Creep is the slow stretch of steel held under load at high temperature, and it is the reason these grades exist.
Grades P5 and P9 suit specific furnace duties and are quoted on enquiry. Tell us the design temperature and code, and we will confirm the match against stock [confirm stocked grades]. Every grade is supplied as creep-resistant alloy pipe with the heat treatment its specification requires. Matching fittings and flanges, such as A234 WP11, WP22 and WP91 and A182 F11, F22 and F91, avoid mixed-material welds.
| Grade | Nominal composition | UNS | Typical use |
|---|---|---|---|
| P11 | 1.25Cr-0.5Mo-Si | K11597 | Steam and process lines |
| P22 | 2.25Cr-1Mo | K21590 | Higher temperature, hydrogen service |
| P91 | 9Cr-1Mo-V-Nb | K90901 | High-pressure steam, thinner walls |
| P5 | 5Cr-0.5Mo | K41545 | On enquiry |
| P9 | 9Cr-1Mo | S50400 | On enquiry |
Sizes, Wall Thickness and Weight
Because A335 pipe is seamless, it is ordered by nominal pipe size and schedule or by specified wall thickness. Dimensions follow ASME B36.10M, and the wall should come from your pressure and temperature calculation, not from the schedule name alone. Our stocked range runs from [confirm] to [confirm] NPS in schedules [confirm]; heavier walls and larger sizes are quoted from the mill. Our pipe schedule chart gives outside diameter, wall and kilograms per metre, so you can sanity-check a size before enquiring.
For high-temperature service pipe, wall thickness is critical because it sets both pressure capacity and creep life. Send your design pressure, temperature and corrosion allowance, and we will help check the wall against the specification before you order. Give us total metres and your preferred lengths so cutting waste is planned, and ask about beveled ends from our workshop.
Heavy-wall P91 for steam headers is normally ordered from the mill against a quoted delivery date, so raise those lines early in your procurement schedule.
Where Chrome-Moly Pipe Is Used
Chrome-moly pipe carries hot, pressurised fluid where carbon steel is not enough. Power generation: main steam, hot reheat and superheater connections, usually P91 or P22, both creep-resistant alloy pipe, as described on our power generation page. Oil and gas: furnace circuits, hydrogen-bearing lines and process headers, often P11 or P22, as described on our oil and gas page. Petrochemical and fertiliser plants: furnace outlets and high-temperature process lines. Cogeneration and waste heat recovery: steam and feedwater at elevated temperature.
In each case the pipe is high-temperature service pipe, so the specification and the paper trail matter as much as the steel. As an alloy steel pipe supplier UAE operators recognise for shutdown work, we keep like-for-like grades in mind. Plant operators also order chrome-moly steel for like-for-like replacement during shutdowns, when matching the original grade matters more than price. The industry pages cover the operator documents each sector requires.
P11, P22 or P91: Which Grade Do You Need?
Start from the design temperature, pressure and code. P11 and P22 suit moderate to high temperature steam and process lines, and A335 P22 pipe is the usual choice when hydrogen is present, so check the Nelson curves in API 941 for your service. P91 has much higher allowable stress at temperature, so it carries the same pressure in a thinner wall, which saves weight and welding time on large steam headers.
The price of that strength is control, and that control is why buyers treat A335 P91 pipe as a specialist item. P91 must be supplied normalised and tempered, welded to a qualified procedure and given P91 post weld heat treatment with hardness checks, because poor heat treatment cuts creep life. P11 and P22 are more forgiving, and they remain the economical answer when temperatures stay moderate.
As a rule, choose P11 for moderate duty, P22 for higher temperature or hydrogen, and P91 where thin walls and creep life justify tighter welding control. Never join two grades without a procedure qualified for the pair. If your specification names a grade, order that grade. If it does not, send the design data and we will flag any mismatch before you buy.
Certificates, Testing and Mill Origin
Alloy pipe is a safety-critical purchase, so we document it. Each heat is certified to EN 10204 3.1, and to 3.2 when an independent inspector must sign off. The certificate shows chemistry, mechanical properties and heat treatment, and the heat number on the pipe links to it. We arrange positive material identification on request, because PMI confirms chromium, molybdenum and, for P91, vanadium, and catches mixed or mislabelled stock.
Each length is hydrostatic tested or electrically tested as the specification permits. The mill country is stated on the documents, and our non-China page explains how origin is proven. We check that markings, heat numbers and certificates agree before material leaves the warehouse, and heat treatment records are available for P91.
A dependable alloy steel pipe supplier UAE plant owners can audit should welcome these checks, and Leema does. PMI is also the safest way to protect a plant from a wrong-grade substitution, which is a common failure in high-temperature piping.
Alloy Steel Pipe Supplier UAE: Stock and Lead Time
We hold alloy pipe in our Sharjah and Abu Dhabi warehouses [confirm stocked grades and sizes by site]. Items not in stock are sourced from approved mills, and the route sets the lead time, which we confirm in every written quotation. Dispatch across the UAE is arranged with the quotation, and export orders ship from the UAE with documents and mill certificates. Tell us your required delivery date when you enquire. As an alloy steel pipe supplier UAE shutdown teams contact early, we check stock first and say plainly if a mill route is needed.
Alloy Steel Pipe Supplier UAE FAQs
What does the P in ASTM A335 P91 mean? +
P stands for pipe in the A335 designation, and the number identifies the alloy. P91 is 9Cr-1Mo-V, P22 is 2.25Cr-1Mo and P11 is 1.25Cr-0.5Mo.
Is ASTM A335 pipe always seamless? +
Yes. A335 covers seamless ferritic alloy steel pipe. Welded alloy pipe falls under a different specification, so confirm the specification on your datasheet.
Does alloy pipe need heat treatment after welding? +
Often, depending on grade, thickness and design code. P91 needs it in almost every case. Follow your approved welding procedure; it governs, not the supplier.
What should I check before choosing an alloy steel pipe supplier UAE projects can audit? +
Ask for the mill certificate before ordering, confirm that the heat number, grade and country of origin agree, and ask whether PMI is offered. Leema, as an alloy steel pipe supplier UAE buyers can audit, expects to be checked on all three.
Can you supply PMI-tested alloy pipe? +
Yes. PMI is available on request and recorded against the heat number, so each length ties back to its certificate.
Can you cut and bevel alloy pipe to length? +
Yes. Our workshop cuts and bevels to your cutting list or drawing. Send the quantities, lengths and bevel angle with your enquiry.
Is chrome-moly steel suitable for seawater service? +
No, it is chosen for temperature, not chloride corrosion. For seawater, a duplex grade is the usual route.
Request an Alloy Pipe Quote
Upload your BOQ or MTO with grade, size, schedule and quantity. Our Sharjah and Abu Dhabi teams reply with price, availability and lead time within [response time]. Call +971 6 533 8167 or email sales@leemaeng.com, or message us on WhatsApp [number]. Mention the project specification if one applies and we will check the grade against it.
Reviewed by [Engineer name], last reviewed 15 October 2026.