Stainless Steel Pipe Supplier UAE: Seamless and Welded ASTM A312 Pipes
Leema Engineering Works is a stainless steel pipe supplier UAE buyers use for seamless stainless pipe and welded pipe to ASTM A312 in 304/304L, 316/316L, 321 and 347. Stock comes from non-China mills [confirm] and ships from Sharjah and Abu Dhabi with EN 10204 certificates, heat numbers and PMI on request. Read on for grades, sizes, finishes, applications and the 304 versus 316L decision. To price a job, send your material list with grade, size and schedule, and our team replies with cost, availability and lead time.
Stainless Steel Pipe Supplier UAE at a Glance
Stainless pipe resists corrosion because chromium forms a thin protective oxide film, and molybdenum in 316L adds resistance to pitting. ASTM A312 is the main specification for seamless and welded austenitic pipe. A stainless steel pipe supplier UAE specifiers trust states the exact grade, UNS number and edition on every quotation, so the pipe you receive matches the datasheet. Most orders are for SS 304 pipe and 316L stainless steel pipe, with 321 and 347 on enquiry [confirm]. The table below gives the range at a glance, and the rest of the page helps you pick a grade, confirm a size and verify the delivery.
| Specification | ASTM A312 (ASME SA-312); A358 for large welded pipe on enquiry [confirm] |
| Grades | TP304/304L, TP316/316L, TP321, TP347 [confirm stocked grades] |
| Types | Seamless and welded |
| Sizes | [confirm size range] NPS |
| Dimensions | ASME B36.19M |
| Finish | Annealed and pickled; polished on enquiry [confirm] |
| Certificates | EN 10204 3.1; 3.2 on request |
| Origin | Non-China mills [confirm] |
| Lead time | Confirmed in the quotation |
ASTM A312 Grades We Stock
Four families cover most enquiries. SS 304 pipe suits general process, water and building services lines. ASTM A312 TP316L adds molybdenum for chloride exposure and is the usual choice for coastal plants and washdown areas. ASTM A312 TP304L pipe and the 316L grade are low-carbon steels that resist sensitisation, the carbide formation in weld zones that can cause intergranular corrosion.
Grades 321 and 347 are stabilised with titanium or niobium for service at elevated temperature [confirm stocked grades]. Each grade ships solution annealed, which restores corrosion resistance after the mill has formed and welded the pipe. Match the pipe to its fittings and flanges, because mixed grades in one line are a common and costly error.
| Grade | UNS | Nominal composition | Typical use |
|---|---|---|---|
| TP304 | S30400 | 18Cr-8Ni | General process and water |
| TP304L | S30403 | 18Cr-8Ni, low carbon | Welded general lines |
| TP316 | S31600 | 16-18Cr, 10-14Ni, 2-3Mo | Chloride exposure |
| TP316L | S31603 | 16-18Cr, 10-14Ni, 2-3Mo, low carbon | Welded chloride exposure |
| TP321 | S32100 | 18Cr-10Ni-Ti | Elevated temperature |
| TP347 | S34700 | 18Cr-10Ni-Nb | Elevated temperature |
Sizes, Wall Thickness and Weight
Specify stainless pipe by nominal pipe size and schedule, and ASME B36.19M gives the S-suffix schedules, such as 5S, 10S, 40S and 80S, that many stainless specifications use. Seamless stainless pipe is the choice for smaller sizes, higher pressure and critical service. Welded stainless steel pipe covers larger diameters and lighter walls at lower cost, and for the largest sizes ASTM A358 stainless pipe may be used. Stocked sizes span [confirm] to [confirm] NPS; stainless pipe sizes and schedules beyond that are quoted from the mill.
Pipe is supplied as pickled and annealed stainless pipe, which gives a clean, uniform surface, and polished finishes can be quoted on enquiry [confirm]. Take wall thickness from your design calculation, not the schedule label. Thin 5S and 10S walls suit low pressure but dent easily and need careful welding, so state the handling and welding needs when you enquire.
For ASTM A312 TP316L lines, give total metres and preferred lengths so cutting waste is planned. Use our pipe schedule chart to check outside diameter and weight per metre before you enquire. As a stainless steel pipe supplier UAE specifiers consult early, we confirm the schedule and wall on the quotation.
Where Stainless Pipe Is Used
Stainless pipe is chosen where corrosion, cleanliness or temperature rules out plain carbon steel. Oil and gas and chemical plants: instrument, utility and corrosive process lines, as covered on our oil and gas page. Construction and infrastructure: building services, water supply and exposed pipework, as covered on our construction page. Power plants: condensate and auxiliary lines, with 321 and 347 stainless pipe where temperatures are higher. Water and wastewater treatment works: process and chemical dosing lines.
Each of these duties favours a different grade, which is why the next section matters. In each case the paperwork matters as much as the grade, because stainless failures are often traced to a wrong-grade substitution or to surface contamination rather than to the specification itself. Hygienic food or pharmaceutical duty usually needs polished sanitary tube, which is a different product from line pipe. A stainless steel pipe supplier UAE plants can audit should help you choose, not just quote.
304 or 316L: Which Stainless Grade Do You Need?
Start with the environment. Grade 304 is a sound general-purpose choice for clean water, mild chemicals and indoor lines. Grade 316L adds molybdenum, which raises resistance to pitting in chloride, so it is the safer choice near the coast, in washdown areas and wherever salt dust settles on warm, humid surfaces, as it often does in the UAE. When buyers compare a 304 or 316L stainless pipe quotation, the price gap is often small beside the cost of replacing a pitted line.
The L grades matter if you will weld, because low carbon limits sensitisation. Austenitic grades can still suffer chloride stress corrosion cracking at higher temperatures, so for hot chloride duty, check whether a duplex grade suits the line better. If your datasheet already names the grade, order it as written.
As a quick rule, 304 suits clean and dry duty, 316L suits salt, chemicals and welding, and 321 and 347 stainless pipe suits lines that run hot. 316L stainless steel pipe also tolerates cleaning chemicals better than 304. If not, send the service data, and we will point out any mismatch before the order is placed.
Certificates, Testing and Mill Origin
Every heat comes with an EN 10204 3.1 certificate, upgraded to 3.2 where a third party must witness the tests. It records chemistry, mechanical results and the heat treatment applied; the heat number stamped on the pipe links the two. We arrange PMI-tested stainless pipe on request. PMI confirms chromium, nickel and molybdenum, so it separates 304 from 316, but carbon, which separates L grades from standard ones, comes from the mill certificate.
Each length is pressure tested or electrically tested, whichever the specification allows, and intergranular corrosion testing can be requested where specified. Mill country is printed on the paperwork, and our non-China page sets out how we evidence origin.
Before dispatch we cross-check each marking against its certificate. Any stainless steel pipe supplier UAE operators approve should open its records to you, and Leema does.
Stainless Steel Pipe Supplier UAE: Stock and Lead Time
Stainless pipe sits in our Sharjah and Abu Dhabi stores [confirm which grades and sizes each site holds]. UAE delivery is arranged alongside the quotation. Whatever is not on the shelf comes from approved mills, and the mill route determines dispatch time, which the quotation states. Export orders leave the UAE with documents and mill test certificates. As a stainless steel pipe supplier UAE maintenance planners call early, we look at stock first and tell you straight away when the mill route applies. Give us your delivery date with the enquiry.
Stainless Steel Pipe Supplier UAE FAQs
What does the L in 316L mean? +
L means low carbon. It limits carbide formation during welding, which protects the weld zone from intergranular corrosion. Most welded process lines specify 316L or 304L for that reason.
What is the difference between pipe and tube? +
Pipe, whether seamless stainless pipe or welded, is sized by nominal pipe size and schedule for carrying fluid. Tube is sized by outside diameter and wall thickness. This page covers pipe.
Can 304 and 316L pipe be welded together? +
Yes, SS 304 pipe and ASTM A312 TP316L pipe can be joined with a filler metal and qualified welding procedure chosen for the combination. Your welding engineer sets the procedure, not the supplier.
How do I confirm the pipe is the grade on the certificate? +
Check the heat number and grade marking against the certificate, and request PMI. As a stainless steel pipe supplier UAE projects can verify, Leema welcomes that check.
Is stainless steel pipe magnetic? +
Austenitic grades are normally non-magnetic, though cold working or welding can add slight magnetism. Magnetism alone does not prove the grade.
How do I avoid contamination on site? +
Keep carbon steel tools, wire brushes and grinding discs away from stainless pipe, and store it off the ground, because iron particles cause rust spots. Passivation after fabrication restores the protective film where welding heat or contamination has damaged it.
Request a Stainless Pipe Quote
Upload your BOQ or MTO with grade, size, schedule and quantity. Our Sharjah and Abu Dhabi teams reply with price, availability and lead time within [response time]. Call +971 6 533 8167 or email sales@leemaeng.com, or message us on WhatsApp [number]. Mention the project specification if one applies and we will check the grade against it.
Reviewed by [Engineer name], last reviewed 15 October 2026.