ISO 9001:2015 Stockist & Fabricator | Sharjah HQ Stockyard | Abu Dhabi Branch
Steel Pipe Stockist & UAE Supplier

Industrial Steel Pipe Supplier UAE: Seamless and Welded Pipes in Carbon, Alloy, Stainless and Duplex

Leema Engineering Works is an industrial steel pipe supplier UAE contractors, plant operators and fabricators use for seamless and welded pipe in carbon, alloy, stainless and duplex steel. As a steel pipe stockist with warehouses in Sharjah and Abu Dhabi, we hold sizes from 1/8 inch nominal pipe size upward, with large-diameter pipes sourced to order [confirm upper size]. Every length comes from a non-China mill and carries a mill certificate with its heat number. Send your size list and we return a priced offer with dispatch dates, usually within [confirm] working hours.

At a Glance Materials & Grades Sizes & Schedules Where Used Seamless vs Welded Certificates & Testing Stock & Lead Time Related Pages FAQs Request Quote

Industrial Steel Pipes at a Glance

This summary covers the full range of industrial steel pipes before you go into a single material. It answers the first questions buyers ask an industrial steel pipe supplier UAE projects depend on: what is stocked, how it is made and what paperwork comes with it.

  • Materials: carbon steel, low temperature carbon steel, alloy steel, stainless steel, and duplex and super duplex.
  • Manufacturing route: seamless, ERW, LSAW and EFW, depending on material and size.
  • Size range: from 1/8 inch nominal pipe size, with large-diameter pipes up to [confirm, e.g. 48 or 120 inch] supplied to order.
  • Wall thickness: pipe schedule 5S to XXS, to ASME B36.10M for carbon and alloy steel and ASME B36.19M for stainless steel. The industrial steel pipes we supply are checked against the right standard on every line.
  • Ends: plain ends, bevelled ends to ASME B16.25 for butt welding, or threaded ends on small bore.
  • Lengths: single random and double random lengths, with cut-to-length service and bevelled ends on request, so pipe arrives ready for fit-up.
  • Documents: mill certificate to EN 10204 3.1 as standard, with origin shown on every certificate.

As a steel pipe stockist, we keep the common sizes on the shelf and buy the rest from the same group of mills, so origin and paperwork stay the same whether an item is stocked or sourced.

Industrial Steel Pipe Supplier UAE: Materials and Grades We Stock

Each material has its own page with full grades, sizes and properties. Here is how they fit together, and why one industrial steel pipe supplier UAE contractors can call for every material saves time on mixed orders.

  • Carbon steel pipe: the most widely used industrial steel pipe for oil, gas, water and process piping, to API 5L, ASTM A106 and A53, with A333 for low temperature service.
  • Alloy steel pipe: chrome-moly pipe to ASTM A335 for high-temperature steam and refinery service.
  • Stainless steel pipe: austenitic grades to ASTM A312 for corrosive, clean and chemical service.
  • Duplex and super duplex steel: high-strength grades to ASTM A790 for seawater, offshore and high-chloride service.

Carbon Steel Pipes

ASTM A106, A53, API 5L and ASTM A333 Gr 6 LTCS pipes from stock.

View Carbon Steel Pipes →

Alloy Steel Pipes

ASTM A335 chrome-moly seamless pipes in P11, P22 and P91 grades.

View Alloy Steel Pipes →

Stainless Steel Pipes

ASTM A312 austenitic pipes in 304/304L, 316/316L, 321 and 347.

View Stainless Steel Pipes →

Duplex & Super Duplex Steel

ASTM A790 duplex 2205 (S31803 / S32205) and super duplex 2507 (S32750).

View Duplex Pipes →

Choosing between these industrial steel pipes starts with the fluid, temperature and pressure, then the project specification. Grade-by-grade details sit on the material pages in the Products menu, so this page stays a guide to the whole range. Most project lists mix several materials, and as an industrial steel pipe supplier UAE wide we quote them together on one offer, with one delivery plan and one document pack. That matters most on process piping packages, where carbon, stainless and alloy lines often arrive on the same truck and must be checked against the same isometrics.

Sizes, Schedules and Wall Thickness

Industrial steel pipes are ordered by nominal pipe size and wall thickness, not by their actual outside diameter. Up to NPS 12 the nominal size and the outside diameter differ; from NPS 14 upward they are the same.

Wall thickness is set by the pipe schedule. ASME B36.10M covers carbon and alloy steel pipe, with schedules from 10 to 160 plus STD, XS and XXS. ASME B36.19M covers stainless pipe, with the lighter 5S, 10S, 40S and 80S schedules. The same schedule number does not always give the same wall in both standards, so always state the standard as well as the schedule. As an industrial steel pipe supplier UAE engineers rely on, we check the wall on every line against the right standard before we quote.

For an industrial steel pipe supplier UAE water and pipeline projects rely on, large-diameter pipes are usually LSAW pipe, rolled from plate and welded along one seam, or by spiral welding for water lines. Above about NPS 24, seamless pipe becomes rare and expensive, so welded pipe is the normal choice [confirm sizes held]. Our Pipe Schedule Chart, linked below, lists wall thickness and weight for every common size and schedule, so you can check weight per metre before you order.

Where Industrial Steel Pipes Are Used

Industrial steel pipe carries almost every fluid on a plant or site, and the right choice depends on what flows through it. Common uses include oil and gas flowlines and process piping, steam and feedwater lines in power plants, seawater and brine lines in desalination plants, chilled water and fire water mains in buildings, and compressed air and cooling water in factories. Each use points to a different material and schedule, which is why we ask for the service on every enquiry. An industrial steel pipe supplier UAE plant engineers trust should ask about the fluid, temperature and pressure before quoting, not only the size.

Seamless or Welded: Which Pipe Should You Specify?

This is the question buyers ask most about seamless and welded pipes UAE projects use, and the answer is usually set by size, pressure and the project specification.

  • Seamless industrial steel pipe has no weld seam, so it is the usual choice for high pressure, high temperature, sour service and cyclic loads, mainly up to about NPS 24.
  • Welded industrial steel pipe, made as ERW or LSAW pipe, has a longitudinal seam. Modern welded pipe is tested along the full seam and is widely accepted for water, fire, utility and many hydrocarbon lines. It is often cheaper, has tighter wall tolerance and is the only practical option for large-diameter pipes.

A simple rule: follow the specification first; if it allows both, choose welded pipe for low and medium pressure and large sizes, and seamless pipe for high pressure, high temperature and critical service. Our full guide compares the two in detail and is linked below. As an industrial steel pipe supplier UAE contractors use for both types, we stock seamless and welded pipes UAE specifications ask for most, so the choice is driven by the job, not by what is on our shelf.

Certificates, Testing and Mill Origin

Every industrial steel pipe we supply can be traced back to the mill that made it, which is standard practice for any industrial steel pipe supplier UAE inspectors approve.

  • Mill certificates: EN 10204 3.1 as standard, with 3.2 when the specification requires it.
  • Heat number: printed on the certificate and on the pipe stencil, then copied onto our delivery note and onto every cut piece.
  • Testing: industrial steel pipes are hydrostatically tested at the mill, with PMI on alloy, stainless and duplex pipe before dispatch [confirm].
  • Origin: all pipe comes from non-China mills, with the mill and country named on the certificate. Third-party inspectors are welcome in our warehouse before dispatch.
  • Marking: original mill stencils stay on the pipe, and cut pieces are re-marked with heat number, size and grade before they leave.

Stock and Lead Time

As a steel pipe stockist, we hold common carbon steel and stainless sizes for quick dispatch [confirm stock range]; alloy, duplex and large-diameter pipes usually take [confirm] weeks from the mill. As an industrial steel pipe supplier UAE projects plan around, we confirm dispatch dates line by line, outside our stock range as well as within it. We deliver industrial steel pipes across the UAE and ship to GCC projects with export documents.

Stocked items in double random lengths can be supplied cut-to-length and bevelled before dispatch, so they arrive ready for fit-up [confirm].

Industrial Steel Pipe Supplier UAE FAQs

What does NPS mean? +

Nominal pipe size, the standard size name for pipe. Up to NPS 12 it differs from the actual outside diameter.

What is a steel pipe stockist? +

A company that holds pipe in its own warehouse, rather than buying only after an order. It means faster delivery and material you can inspect before dispatch.

What is the difference between schedule 40 and schedule 80? +

Schedule 80 has a thicker wall than schedule 40 for the same size, so it handles higher pressure. Check the wall in ASME B36.10M or ASME B36.19M for the exact figure.

Do you cut industrial steel pipes to length? +

Yes. Our cut-to-length service gives plain or bevelled ends, with the heat number transferred to each piece [confirm].

What lengths are pipes supplied in? +

Usually single random (about 6 m) or double random lengths (about 12 m). Double random lengths mean fewer field welds on long runs, while industrial steel pipes in single random lengths are easier to handle on tight sites.

Can an industrial steel pipe supplier UAE based supply large-diameter pipes? +

Yes, mainly as LSAW pipe, sourced to order from the same mills as our stock range.

Why buy from an industrial steel pipe supplier UAE based instead of importing? +

Local stock, faster delivery, pipe you can inspect before dispatch and one supplier for mixed-material orders.

Do you supply seamless and welded pipes UAE projects need in the same order? +

Yes. Both types can be quoted together from our stock range, with the manufacturing route shown on each line.

Do you supply pipe with coatings? +

On request, as specified [confirm coating options]. As an industrial steel pipe supplier UAE contractors use for buried and exposed lines, we confirm the coating on the quote.

Request an Industrial Steel Pipe Quote

Upload your BOQ or MTO with material, size, schedule and quantity, and we reply with a priced offer within [confirm] working hours. Call +971 6 533 8167, WhatsApp [confirm number] or email sales@leemaeng.com.

Request Technical Quote / BOQ Call +971 6 533 8167 Email Sales Desk

Reviewed by [Engineer name], [Role], Leema Engineering Works. Last reviewed [date].