Carbon Steel Pipe Supplier UAE: ASTM A106, A53, A333 and API 5L Pipe
Leema Engineering Works is a carbon steel pipe supplier UAE contractors, fabricators and plant owners use for seamless and welded pipe to ASTM A106 Gr B, A53, API 5L and ASTM A333 Gr 6 LTCS. We supply grades from small bore to large sizes, every length carries an EN 10204 3.1 mill certificate with heat number, material comes from non-China mills, and dispatch is from Sharjah and Abu Dhabi with lead time confirmed in each quotation. Send your size list and we quote the standard, grade and schedule on every line, with each item checked against your datasheet before pricing.
Carbon Steel Pipes at a Glance
Buyers comparing a carbon steel pipe supplier UAE wide want the standard, grade, size range and paperwork before they enquire. The summary below covers what we supply, and each grade is explained in the next section. Sizes, schedules and wall thickness follow ASME dimensional standards, so lengths from different heats match on site.
- Standards: ASTM A106 for seamless high-temperature pipe, A53 for general-purpose seamless and welded pipe, A333 for low temperature and API 5L for line pipe
- Grades: A106 Gr B, A53 Gr A and B, API 5L Gr B and X grades, A333 Gr 6
- Size range: Small bore upward, confirmed per enquiry
- Schedules: STD, XS and XXS, with Schedule 10 to 160 under ASME B36.10M
- Ends: Plain, bevelled or threaded, as required
- Finish: Black carbon steel pipe as standard, or coated, confirmed in the quotation
- Documents: EN 10204 3.1 mill certificates, with 3.2 on request
- Origin: Non-China sources, with origin printed on the certificate
Carbon Steel Pipe Supplier UAE: Grades We Stock
Four standards cover most orders. Each row below gives the use, UNS number and minimum strength, so you can match the grade to your datasheet before you request a price. Grades that look alike on paper behave differently in service, which is why the standard matters more than the size. As a carbon steel pipe supplier UAE projects approve against, we state the exact edition on every line. Heat numbers are recorded for each grade, which lets inspectors trace any length.
- ASTM A106 Gr B (UNS K03006): seamless pipe for high-temperature service such as steam, boiler feed and hot oil, with 240 MPa minimum yield and 415 MPa minimum tensile
- ASTM A53 Gr B (UNS K03005): seamless or ERW pipe for water, air, gas and steam, available black or galvanised, with 240 MPa yield and 415 MPa tensile minimums
- API 5L Gr B and X grades: line pipe and higher-strength X grades in PSL1 and PSL2, with Gr B at 241 MPa yield and 414 MPa tensile minimums for PSL1
- ASTM A333 Gr 6 LTCS (UNS K03006): low temperature carbon steel pipe, seamless or welded, impact tested at minus 45 degrees Celsius, with 240 MPa yield and 415 MPa tensile minimums
Sizes, Wall Thickness and Weight
Wall thickness for carbon steel pipe follows ASME B36.10M. Carbon steel pipe schedule 40 and 80 are the most requested, alongside standard weight, extra strong and heavier walls for high-pressure duty. Wall thickness depends on design pressure, temperature and corrosion allowance, so confirm the schedule before ordering. A carbon steel pipe supplier UAE buyers consult should give weight per metre as well as size. Use our Pipe Schedule Chart for wall thickness and weight per metre by size, because mass matters for transport and support design.
Plain ends suit coupled and flanged joints, bevelled ends suit butt welding, and threaded ends are available on request. Pipe is supplied in random or cut lengths, and our workshop can cut to length before delivery. As a carbon steel pipe supplier UAE fabricators rely on, we confirm tolerances and end preparation in the quotation. Sizes outside normal stock are quoted per enquiry. Weight tolerances and length tolerances follow the governing standard, and we state them when the order needs them. For lifting and transport planning, ask for total weight per line and per bundle.
Where Carbon Steel Pipe Is Used
- Oil and gas: API 5L pipe for pipelines and flowlines, and A106 for refinery process lines, as described on our oil and gas industry page
- Power and water: steam, boiler feed and cooling water lines, as described on our power and water industry page
- Petrochemical and process plants: carbon steel pipe for process piping, utilities and service headers, as described on our process plant industry page
- Construction: A53 pipe for fire fighting, chilled water and compressed air, as described on our construction industry page
Carbon steel rusts in wet or corrosive conditions, so buried or damp lines need coating, lining or cathodic protection, and aggressive media may call for stainless steel instead. Each industry page lists typical specifications and approvals, so engineers can check requirements early. A carbon steel pipe supplier UAE projects depend on will flag these limits early. Temperature matters too: standard carbon steel loses toughness in the cold, which is why A333 Gr 6 exists, and it loses strength at very high temperature, where alloy grades take over.
Which Carbon Steel Pipe Do You Need: A106, A53 or A333?
Start with the service conditions, not the unit price. Four points settle most choices.
- Temperature: high-temperature lines point to A106 Gr B, while cold service points to A333 Gr 6.
- Pressure: high-pressure carbon steel pipe is normally seamless, while ERW steel pipe suits lower-pressure utility lines at lower cost.
- Application: carbon steel seamless pipe in A106 suits steam and refinery lines, while water and fire fighting often use A53.
- Specification: pipelines call for API 5L, with PSL2 where the project requires tighter chemistry and toughness.
Buyers often order A106 where A53 would do, or A53 where the datasheet demands A106, so check the standard named on the line list. Cold-service pipe is a separate decision, because impact testing must be confirmed before dispatch. Where a datasheet allows either seamless or ERW pipe, we price both so you can compare cost and lead time. Our seamless versus welded pipe guide explains the wider comparison. If your datasheet is unclear, send the line list to a carbon steel pipe supplier UAE engineers can consult, and we will check grade, schedule and standard before you order. Match pipe, fittings and flanges to the same grade so the system behaves as designed. For critical lines, share design pressure, temperature and fluid data early, so the right grade and schedule are fixed before ordering.
Certificates, Testing and Mill Origin
- Carbon steel pipe mill test certificate to EN 10204 3.1, with 3.2 where independent inspection is required
- Heat numbers marked on each length and tied back to the certificate
- Hydrostatic or electric testing as the standard requires
- Impact test results for A333 Gr 6, and PSL2 testing for API 5L pipe where specified
- Witness inspection by an agency you nominate, at our stores or workshop
A carbon steel pipe supplier UAE projects approve must show the heat number, mill and test results for each length. Material comes from non-China mills, with the country shown on the certificate. Read more on our Non-China Origin and Quality and Approvals pages. For critical service, settle the inspection and test plan before you place the order, so hold points are agreed, and ask for the supplementary requirements to be written into the purchase order.
Stock and Lead Time
We hold common carbon steel pipe sizes at Sharjah and Abu Dhabi, and dispatch time for stocked sizes is confirmed in each quotation. API 5L Grade B line pipe is usually quoted against mill lead time. Sizes outside stock follow mill lead time, which we state before you order, and large mill orders are planned against your programme. As a carbon steel pipe supplier UAE wide, we ship across the Emirates, and we prepare export documents for GCC consignments. Long lengths are packed to protect bevels and arrive straight, and delivery is planned around your installation date.
Carbon Steel Pipe Supplier UAE FAQs
Is A106 Gr B the same as ASTM A53 Gr B? +
No. They share similar strength, but A106 is written for high-temperature seamless pipe, while A53 is a general-purpose standard that includes welded pipe. Check the standard named on your line list before ordering.
What does LTCS mean? +
LTCS means low temperature carbon steel. A333 Gr 6 is the common grade, impact tested for cold service, so it keeps its toughness where ordinary carbon steel would not. Ask for the impact test report with the certificate.
What is the difference between PSL1 and PSL2? +
PSL2 adds stricter chemical limits, toughness and testing than PSL1, and is chosen for demanding pipelines such as sour service or colder climates.
Does carbon steel pipe need a coating? +
Often yes. Outdoor, buried and damp lines usually need paint, galvanising, wrapping or lining to resist corrosion, and the coating should be specified before ordering because it affects end preparation.
How do I find a carbon steel pipe supplier UAE buyers can verify? +
Look for ISO 9001 certification, traceable heat numbers, named mill origin and stock held in the UAE, and ask for a sample certificate before you order.
Can I order cut lengths or bevelled pipe? +
Yes. Our workshop can cut pipe to length and bevel the ends before delivery, so it arrives ready to weld.
Request a Carbon Steel Pipe Quote
Share your BOQ, MTO or drawings, or reach us by phone or WhatsApp on [phone number]. We send a priced quotation within [response time]. Request a carbon steel pipe quote today and receive certified pipe with full documentation. Include the standard, grade, size, schedule and quantity for the fastest reply. Our engineers read your list first and come back with any technical questions.
Reviewed by [Engineer name], [role], 14 October 2026.