Industrial Flanges Supplier in Abu Dhabi
Leema Engineering Works is a flanges supplier in Abu Dhabi for oil and gas, power, water and industrial projects, with a sales office in Al Danah and stock dispatched from our warehouse in Sharjah Industrial Area 2 [confirm whether any stock is held in Abu Dhabi]. We supply ASME B16.5 and B16.47 flanges from class 150 to 2500 in carbon steel, low temperature, stainless and duplex grades, all from non-China mills and each with its mill certificate. Stocked items usually reach Mussafah, KEZAD and Abu Dhabi city within 1 to 2 working days, and Ruwais and Al Ain within 2 to 3 [confirm]. Send your flange list and we return a priced offer within [confirm] working hours.
Flanges in Abu Dhabi at a Glance
These are the facts buyers check first when they compare flange dealers in Abu Dhabi and choose a flanges supplier in Abu Dhabi:
| Parameter | Details & Abu Dhabi Supply Scope |
|---|---|
| Types | weld neck, slip-on, blind, socket weld, threaded, lap joint, plus spectacle blinds and spacers. |
| Standards | ASME B16.5 (1/2 to 24 inch) and ASME B16.47 Series A and B (26 inch and above). |
| Classes | 150, 300, 600, 900, 1500 and 2500. |
| Facings | raised face (RF), flat face (FF) and ring type joint (RTJ). |
| Materials | ASTM A105, A350 LF2, A182 F304L / F316L, A182 F51 duplex and F53 super duplex. |
| Origin | non-China mills only, named on every certificate. |
| Sales office | Baniyas Najda Street, Al Danah, Zone 1; stock is dispatched from Sharjah Industrial Area 2 [confirm]. |
| Why it matters | as an Abu Dhabi flanges supplier that holds its own stock, we show you the actual flanges and certificates before you pay. |
Flanges Supplier in Abu Dhabi: Types and Materials We Stock
As a flanges stockist Abu Dhabi buyers can meet in Al Danah, we hold the types that local plants and projects replace most often. Full technical tables sit on our main Flanges page; this summary shows what our flange supply in Abu Dhabi covers today.
- Weld neck flanges in Abu Dhabi: the standard choice for process, high-pressure and high-temperature lines, with the bore matched to your pipe schedule.
- Slip-on flanges in Abu Dhabi: cheaper to buy and easier to align, used on water, cooling and low-pressure utility lines.
- Blind flanges in Abu Dhabi: for closing line ends, vessel nozzles and test points, held in the common classes.
- Socket weld flanges in Abu Dhabi and threaded flanges in Abu Dhabi: for small-bore instrument, drain and utility lines up to about 2 inch.
- Lap joint flanges in Abu Dhabi: used with stub ends on stainless lines, so the flange can stay carbon steel.
- Spectacle blinds in Abu Dhabi: figure-8 blinds, spades and spacers for isolation during maintenance [confirm stock].
- Carbon steel flanges in Abu Dhabi: A105 flanges in Abu Dhabi cover most general service, and LF2 flanges in Abu Dhabi (A350 LF2) are held for gas processing and cold service.
- SS 316L flanges in Abu Dhabi: A182 F316L and F304L for chemical, food and corrosive service.
- Duplex flanges in Abu Dhabi: A182 F51 and F53 for seawater, desalination and offshore lines [confirm stock].
Because our stock sits beside our workshop, flanges can be checked and prepared before the truck leaves. That is the difference between a flanges supplier in Abu Dhabi that holds real stock and a trader that only passes on orders.
Pressure Classes and Facings for Abu Dhabi Projects
ASME B16.5 flanges in Abu Dhabi orders are held from 1/2 inch to 24 inch, and B16.47 flanges in Abu Dhabi are sourced for larger lines [confirm stocked range].
- Class 150 and 300: most utility, water and general process lines.
- Class 600 and 900: oil and gas, steam and higher-pressure process lines.
- Class 1500 and 2500: wellhead, injection and high-pressure hydraulic service.
As a flanges supplier in Abu Dhabi shutdown teams rely on, we keep class 600 to 2500 in the most common bores. High-pressure flanges in Abu Dhabi in class 900 and above usually come with RTJ facing. RTJ flanges in Abu Dhabi are machined with an oval or octagonal groove that must match the ring gasket, so always state the ring number on your enquiry. Raised face suits most other service, and flat face is used when mating with cast iron or plastic-lined equipment. Our flange sizes for Abu Dhabi run across all these classes in the common bores; if a size or class is not held, our Abu Dhabi flanges supplier team gives a firm mill date before you order.
Stock, Collection and Delivery in Abu Dhabi
As a flanges supplier serving Abu Dhabi from one stock point, we pick and check every order at our warehouse in Sharjah, while the Al Danah office handles quotes, follow-up and site coordination.
- Flange delivery in Abu Dhabi: as a flanges supplier for Abu Dhabi sites, trucks reach Abu Dhabi city, Mussafah, ICAD and KEZAD in 1 to 2 working days, and Ruwais, Taweelah and Al Ain in 2 to 3 [confirm].
- Shutdown flange supply: for planned shutdowns, we reserve stock and deliver in call-offs by area [confirm].
- Port and free zone sites: Khalifa Port and KEZAD need gate passes, so send access details with the order.
- Urgent flanges for Abu Dhabi: for a leaking joint, call our Abu Dhabi flanges supplier team and we confirm the fastest truck [confirm].
Flanges are often the first item missing on a job, so a flanges supplier in Abu Dhabi with real stock and a local office saves days on a repair.
Which Flange Type Do You Need in Abu Dhabi?
This is the question Abu Dhabi contractors ask a flanges supplier in Abu Dhabi most often. Start with your piping specification, as any industrial flanges supplier should; if it allows a choice, these rules help.
- Weld neck or slip-on: weld neck for pressure, temperature cycling and critical lines; slip-on for low-pressure utility work where cost and fit-up speed matter.
- RF or RTJ: raised face for most service up to class 600; RTJ for class 900 and above, and wherever the specification calls for it on oil and gas lines.
- Carbon or alloy: A105 for normal temperatures, LF2 below minus 29 degrees C, stainless or duplex where the fluid is corrosive.
Projects for ADNOC group companies follow the operator's own material specifications and may add testing rules [confirm Leema's registration status before naming it]. Not sure? Send the line list and our Abu Dhabi flanges supplier team will mark the flange type, class and facing for each line, with the reason.
Special Flange Sizes for Older Abu Dhabi Plants
Older plants often have flanges that no longer match a catalogue size. As a flanges supplier for Abu Dhabi plants with its own machine shop in Sharjah, we make custom flanges to a drawing, a sample or a worn part, so a repair does not wait for an overseas order. See our custom flanges page for sizes, materials and lead times.
How Much Do Flanges Cost in Abu Dhabi?
There is no single flange price in Abu Dhabi, and an honest industrial flanges supplier prices each line instead of quoting a flat rate. Four things set the cost.
- Type: blind and slip-on usually cost less than weld neck in the same size and class.
- Class and size: each step up in class adds weight, forging and machining.
- Material: A105 costs least; LF2, stainless and duplex cost more.
- Origin and certificates: certified flanges in Abu Dhabi from non-China mills cost more than unbranded stock, but they pass inspection first time.
Forging prices follow the steel market, so every flanges supplier in Abu Dhabi sets a quote validity period; ours is [confirm] days. Quotes from different flanges suppliers in Abu Dhabi can only be compared when each names the standard, class, facing, material and origin, so we always show all five.
Certificates, Marking and Mill Origin
As an industrial flanges supplier, we ship every flange with an EN 10204 3.1 certificate naming the mill, country, standard, material and heat code, with 3.2 certificates arranged when a project asks. Each flange is marked with size, class, facing, material and heat code, so the certificate can be traced on site.
All our flange stock for Abu Dhabi comes from non-China mills, which is how a flanges supplier in Abu Dhabi proves origin on projects with strict material rules. Where a tender scores In-Country Value, we can provide our ICV certificate [confirm ICV certificate held]. Inspectors are welcome at our warehouse before dispatch.
Abu Dhabi References
[Confirm and replace with authorised references.] Reference 1: [class 600 RTJ flanges for an oil and gas shutdown, year, scope]. Reference 2: [duplex flanges for a desalination plant in Taweelah, year, scope].
Like any responsible Abu Dhabi flanges supplier, we publish references only with the client's permission. Each one names the sector, the flanges supplied, the delivery time achieved and whether the paperwork passed inspection first time, because those are the facts a buyer choosing a flanges supplier in Abu Dhabi needs to see. Sectors we have supplied in the emirate include oil and gas, power and water, and manufacturing [confirm each sector].
Related Pages
Buying pipe and fittings for the same job? As a supplier of flanges in Abu Dhabi, we also stock both: see our pipe and pipe fittings pages for Abu Dhabi, our main Flanges page for full dimensions, or send your list through Request a Quote.
Flanges Supplier in Abu Dhabi: FAQs
Do you have an office in Abu Dhabi?
Yes. Our sales office is on Baniyas Najda Street, Al Danah, Zone 1. Stock is dispatched from Sharjah [confirm].
How fast can a flanges supplier in Abu Dhabi deliver?
As a flanges supplier serving Abu Dhabi from Sharjah, we usually deliver stocked flanges to Abu Dhabi city and Mussafah within 1 to 2 working days, and to Ruwais and Al Ain within 2 to 3 [confirm].
Do you stock RTJ flanges and ring gaskets?
We stock RTJ flanges in the common classes; tell us the ring number and we supply matching gaskets and stud bolts on request [confirm].
Do you sell single flanges or only full orders?
Both. As an industrial flanges supplier, we supply single pieces for repairs and full packages at project rates.
Is all your flange stock from non-China mills?
Yes. As a flanges supplier in Abu Dhabi with a non-China policy, we name the mill and country on every certificate.
Can I inspect flanges before ordering?
Yes. Our team can show stock, markings and certificates at our Al Danah office or the warehouse by appointment.
Request a Flanges Quote for Abu Dhabi
Send your list with type, size, class, facing, material and quantity, plus the site address, and mark any urgent lines. Our Abu Dhabi flanges supplier team will reply with prices and dates within [confirm] working hours. Call +971 6 533 8167 [confirm Abu Dhabi direct line], WhatsApp [confirm number] or email sales@leemaeng.com.
Visit or Contact Us
Leema Engineering Works, flanges supplier in Abu Dhabi: Baniyas Najda Street, Al Danah, Zone 1, Abu Dhabi, UAE. Phone [confirm Abu Dhabi number]. Email sales@leemaeng.com. Hours [Monday to Friday, 8:30 am to 5:30 pm, confirm]. Map: [Google Maps link].