Industrial Flanges Supplier in Dubai
Leema Engineering Works is a flanges supplier in Dubai for plants, shutdown teams, MEP and EPC contractors and marine yards, delivering from our stock in Sharjah Industrial Area 2, about 30 to 60 minutes from most Dubai sites. We supply ASME B16.5 and B16.47 flanges from class 150 to 2500 in carbon steel, low temperature, stainless and duplex grades, all from non-China mills and each with its mill certificate. Most stocked items reach Jebel Ali, Dubai Investment Park and Al Quoz on the next working day [confirm]. Send your flange list and we return a priced offer within [confirm] working hours.
Flanges in Dubai at a Glance
These are the facts buyers check first when they compare flange dealers in Dubai and choose a flanges supplier in Dubai:
| Parameter | Details & Dubai Supply Scope |
|---|---|
| Types | weld neck, slip-on, blind, socket weld, threaded, lap joint, plus spectacle blinds and spacers. |
| Standards | ASME B16.5 (1/2 to 24 inch) and ASME B16.47 Series A and B (26 inch and above). |
| Classes | 150, 300, 600, 900, 1500 and 2500. |
| Facings | raised face (RF), flat face (FF) and ring type joint (RTJ). |
| Materials | ASTM A105, A350 LF2, A182 F304L / F316L, A182 F51 duplex and F53 super duplex. |
| Origin | non-China mills only, named on every certificate. |
| Stock held at | 27th Street, Old BMW Road, Sharjah Industrial Area 2. We have no Dubai office; all orders are handled by our Sharjah team. |
| Why it matters | as a Dubai flanges supplier that holds its own stock, we show you the actual flanges and certificates before you pay. |
Flanges Supplier in Dubai: Types and Materials We Stock
As a flanges stockist Dubai contractors can reach in under an hour, we hold the types that local plants and projects replace most often. Full technical tables sit on our main Flanges page; this summary shows what our flange supply in Dubai covers today.
- Weld neck flanges in Dubai: the standard choice for process, high-pressure and high-temperature lines, with the bore matched to your pipe schedule.
- Slip-on flanges in Dubai: cheaper to buy and easier to align, used on chilled water, cooling and low-pressure utility lines.
- Blind flanges in Dubai: for closing line ends, vessel nozzles and test points, held in the common classes.
- Socket weld flanges in Dubai and threaded flanges in Dubai: for small-bore instrument, drain and utility lines up to about 2 inch.
- Lap joint flanges in Dubai: used with stub ends on stainless lines, so the flange can stay carbon steel.
- Spectacle blinds in Dubai: figure-8 blinds, spades and spacers for isolation during maintenance [confirm stock].
- Carbon steel flanges in Dubai: A105 flanges in Dubai cover most general service, and LF2 flanges in Dubai (A350 LF2) are held for LPG, gas and cold service.
- SS 316L flanges in Dubai: A182 F316L and F304L for chemical, food, district cooling and corrosive service.
- Duplex flanges in Dubai: A182 F51 and F53 for seawater, desalination and offshore lines, often needed by yards in Dubai Maritime City [confirm stock].
Because our stock sits beside our workshop, flanges can be checked and prepared before the truck leaves. That is the difference between a flanges supplier in Dubai that holds real stock and a trader that only passes on orders.
Pressure Classes and Facings for Dubai Projects
ASME B16.5 flanges in Dubai orders are held from 1/2 inch to 24 inch, and B16.47 flanges in Dubai are sourced for larger lines [confirm stocked range].
- Class 150 and 300: most utility, chilled water and general process lines.
- Class 600 and 900: oil and gas, steam and higher-pressure process lines.
- Class 1500 and 2500: wellhead, injection and high-pressure hydraulic service.
As a flanges supplier in Dubai shutdown teams rely on, we keep class 600 to 2500 in the most common bores. High-pressure flanges in Dubai in class 900 and above usually come with RTJ facing. RTJ flanges in Dubai are machined with an oval or octagonal groove that must match the ring gasket, so always state the ring number on your enquiry. Raised face suits most other service, and flat face is used when mating with cast iron or plastic-lined equipment. Our flange sizes for Dubai run across all these classes in the common bores; if a size or class is not held, our Dubai flanges supplier team gives a firm mill date before you order.
Stock, Collection and Delivery in Dubai
As a flanges supplier serving Dubai from one stock point, we pick and check every order at our Sharjah Industrial Area 2 warehouse and send the truck straight to your site.
- Flange delivery in Dubai: as a flanges supplier for Dubai sites, we use our own or contracted trucks to cover Jebel Ali, JAFZA, Dubai Investment Park, Al Quoz, Ras Al Khor and Dubai Industrial City [confirm].
- Next-day flange delivery: orders confirmed before [12:00 noon] usually reach your site the next working day [confirm].
- Free zones: send gate pass details with the order.
- Collection: by appointment at our Sharjah yard.
- Urgent flanges for Dubai: for a leaking joint or a shutdown, call the sales line; stocked flanges can leave the same day where traffic and site access allow.
Flanges are often the first item missing on a job, so a flanges supplier in Dubai with real stock an hour away saves days on a repair.
Which Flange Type Do You Need in Dubai?
This is the question maintenance teams ask a flanges supplier in Dubai most often. Start with your piping specification, as any industrial flanges supplier should; if it allows a choice, these rules help.
- Weld neck or slip-on: weld neck for pressure, temperature cycling and critical lines; slip-on for low-pressure utility work where cost and fit-up speed matter.
- RF or RTJ: raised face for most service up to class 600; RTJ for class 900 and above, and wherever the specification calls for it on oil and gas lines.
- Carbon or alloy: A105 for normal temperatures, LF2 below minus 29 degrees C, stainless or duplex where the fluid is corrosive.
Refinery and terminal sites linked to ENOC (Emirates National Oil Company) and power and water plants for DEWA (Dubai Electricity and Water Authority) may add their own material and testing rules [confirm]. Not sure? Send the line list and our Dubai flanges supplier team will mark the flange type, class and facing for each line, with the reason.
Special Flange Sizes for Older Dubai Plants
Older plants often have flanges that no longer match a catalogue size. As a flanges supplier for Dubai plants with its own machine shop in Sharjah, we make custom flanges to a drawing, a sample or a worn part, so a repair does not wait for an overseas order. See our custom flanges page for sizes, materials and lead times.
How Much Do Flanges Cost in Dubai?
There is no single flange price in Dubai, and an honest industrial flanges supplier prices each line instead of quoting a flat rate. Four things set the cost.
- Type: blind and slip-on usually cost less than weld neck in the same size and class.
- Class and size: each step up in class adds weight, forging and machining.
- Material: A105 costs least; LF2, stainless and duplex cost more.
- Origin and certificates: certified flanges in Dubai from non-China mills cost more than unbranded stock, but they pass inspection first time.
Forging prices follow the steel market, so every flanges supplier in Dubai sets a quote validity period; ours is [confirm] days. Quotes from different flanges suppliers in Dubai can only be compared when each names the standard, class, facing, material and origin, so we always show all five.
Certificates, Marking and Mill Origin
As an industrial flanges supplier, we ship every flange with an EN 10204 3.1 certificate naming the mill, country, standard, material and heat code, with 3.2 certificates arranged when a project asks. Each flange is marked with size, class, facing, material and heat code, so the certificate can be traced on site.
All our flange stock for Dubai comes from non-China mills, which is how a flanges supplier in Dubai proves origin to ENOC-linked, DEWA and free zone projects. Inspectors are welcome at our warehouse before dispatch.
Dubai References
[Confirm and replace with authorised references.] Reference 1: [class 600 RTJ flanges for an oil and gas shutdown in Jebel Ali, year, scope]. Reference 2: [duplex flanges for a seawater line at a Dubai yard, year, scope].
Like any responsible Dubai flanges supplier, we publish references only with the client's permission. Each one names the sector, the flanges supplied, the delivery time achieved and whether the paperwork passed inspection first time, because those are the facts a buyer choosing a flanges supplier in Dubai needs to see. Sectors we have supplied in the emirate include oil and gas, power, marine and district cooling [confirm each sector].
Related Pages
Buying pipe and fittings for the same job? As a supplier of flanges in Dubai, we also stock both: see our pipe and pipe fittings pages for Dubai, our main Flanges page for full dimensions, or send your list through Request a Quote.
Flanges Supplier in Dubai: FAQs
Do you have an office or warehouse in Dubai?
No. Our flange stock and sales team are in Sharjah Industrial Area 2, about 30 to 60 minutes from most sites in the emirate, and we deliver there daily [confirm].
How fast can a flanges supplier in Dubai deliver?
As a flanges supplier serving Dubai from Sharjah, we usually deliver stocked flanges the next working day, and urgent items the same day where traffic and access allow [confirm].
Do you stock RTJ flanges and ring gaskets?
We stock RTJ flanges in the common classes; tell us the ring number and we supply matching gaskets and stud bolts on request [confirm].
Do you sell single flanges or only full orders?
Both. As an industrial flanges supplier, we supply single pieces for repairs and full packages at project rates.
Is all your flange stock from non-China mills?
Yes. As a flanges supplier in Dubai with a non-China policy, we name the mill and country on every certificate.
Can I inspect flanges before ordering?
Yes. Our team can show stock, markings and certificates at our warehouse in Sharjah by appointment.
Request a Flanges Quote for Dubai
Send your list with type, size, class, facing, material and quantity, plus the site address, and mark any urgent lines. Our Dubai flanges supplier team will reply with prices and dates within [confirm] working hours. Call +971 6 533 8167, WhatsApp [confirm number] or email sales@leemaeng.com.
Contact Our Team
Leema Engineering Works, flanges supplier in Dubai and across the UAE, from 27th Street, Old BMW Road, Sharjah Industrial Area 2, Sharjah, UAE. Phone +971 6 533 8167. Email sales@leemaeng.com. Hours [Saturday to Thursday, 8:00 am to 6:00 pm, confirm]. Map: [Google Maps link to the Sharjah warehouse].