ISO 9001:2015 Stockist & Fabricator | Sharjah HQ Stockyard | Abu Dhabi Branch
GCC Cross-Border Supply

Industrial Flanges Supplier for Qatar

Leema Engineering Works is a flanges supplier in Qatar projects can order from directly: a UAE stockist in Sharjah that ships ASME B16.5 and B16.47 flanges from class 150 to 2500 in carbon steel, low temperature, stainless and duplex grades to Doha, Ras Laffan, Mesaieed and Dukhan. Every flange leaves with an EN 10204 mill certificate and a full export document pack, and most stocked items reach their Qatari site within [5 to 8] working days of order [confirm]. Send your flange list and we return a priced offer with delivery terms within [confirm] working hours.

On this page: At a Glance · Types, Classes and Facings · Operator Specifications · Route and Lead Time · Sizes · Choosing a Class · Certificates · References · FAQs · Quote
Quick Reference

Flanges for Qatar at a Glance

These are the facts Qatari contractors check first when they choose a flanges supplier in Qatar from outside the country:

Parameter Details & Qatar Export Scope
What we supply flanges in Qatar for LNG, gas processing, petrochemicals, power and water and construction.
Types weld neck, slip-on, blind, socket weld, threaded, lap joint, plus spectacle blinds and spacers.
Standards ASME B16.5 (1/2 to 24 inch) and ASME B16.47 Series A and B (26 inch and above).
Classes and facings 150 to 2500, raised face (RF), flat face (FF) and ring type joint (RTJ).
Materials ASTM A105, A350 LF2, A182 F304L / F316L, A182 F51 duplex and F53 super duplex.
Origin non-China mills only, named on every certificate.
Stock held at Sharjah Industrial Area 2, UAE. We have no office in Qatar; orders are handled by our UAE export team.
Route by sea from Jebel Ali to Hamad Port, or by road through Saudi Arabia, entering Qatar at the Abu Samra border.
Main delivery points Doha, Hamad Port, Mesaieed, Ras Laffan and Dukhan.
Why it matters as a flanges stockist Qatar buyers can reach in days, we ship landed, certified stock instead of waiting weeks for a forge.
Product Classification

Flanges Supplier in Qatar: Types, Classes and Facings

As an industrial flanges supplier with stock a short trip away, we hold the types Qatari plants and shutdown teams replace most often. Full technical tables sit on our main Flanges page; this summary shows what our flange supply in Qatar covers today.

  • Weld neck: the standard choice for process, high-pressure and high-temperature lines, with the bore matched to your pipe schedule.
  • Slip-on: cheaper and easier to align, used on water, cooling and low-pressure utility lines.
  • Blind: for closing line ends, vessel nozzles and test points.
  • Socket weld and threaded: for small-bore instrument, drain and utility lines up to about 2 inch.
  • Lap joint: used with stub ends on stainless lines, so the flange can stay carbon steel.
  • Spectacle blinds: figure-8 blinds, spades and spacers for isolation during maintenance [confirm stock].
  • Materials: A105 for general service; A350 LF2 for LNG, gas processing and cold service lines; F316L for corrosive service; F51 and F53 duplex for seawater cooling and desalination lines along the Qatari coast [confirm stock].

Because Leema is a flanges supplier in Qatar buyers can inspect before shipping, flanges are checked for facing, bore and markings in our Sharjah workshop before they leave. That is what separates a stockist from a trader that only passes on orders, and it is why many Qatari contractors use us for urgent and mixed orders. A flanges supplier in Qatar that holds real stock can also pack flanges by line, with stud bolts and gaskets if you ask.

End-User Compliance

Working to Qatar Operator Specifications

Most industrial work in Qatar follows operator rules. QatarEnergy and its LNG operations at Ras Laffan and Mesaieed issue their own material specifications and approved vendor lists, while Kahramaa sets its own requirements for water and power projects. As a flanges supplier in Qatar contractors rely on, we check each line against your specification before we quote and confirm whether the named forge is approved for that project [confirm Leema's QatarEnergy and Kahramaa registration status before naming either as a client]. If a flange cannot meet the specification from stock, a good flanges supplier for Qatar says so in writing; we do, and offer a sourced option with a firm date.

Logistics & Transit

Shipping Route and Lead Time From the UAE

Most loads for Qatar go by sea from Jebel Ali to Hamad Port, a sailing of about [2 to 3] days, then by truck to Mesaieed, Ras Laffan or Dukhan [confirm]. Urgent loads can also go by road through Saudi Arabia, entering Qatar at Abu Samra, which needs Saudi transit documents as well [confirm]. Qatar Customs clears each shipment against the commercial invoice, packing list and certificate of origin, so we send copies to your clearing agent before the goods arrive.

A flanges supplier in Qatar that ships from the UAE should give you the route, transit days and clearance documents up front; we do on every quote. Note that the Qatari weekend is Friday and Saturday, so we time arrivals for Sunday to Thursday. Any Qatar flanges supplier should build this into delivery dates.

Stock Coverage

Flange Sizes, Classes and Facings in Stock

As a flanges stockist Qatar projects can call on for both common and heavy classes, we cover the ranges local lines use most [confirm stocked range].

  • Class 150 and 300: 1/2 inch to 24 inch in RF, for utility, water and general process lines.
  • Class 600 and 900: common bores in RF and RTJ, for oil and gas, steam and higher-pressure process lines.
  • Class 1500 and 2500: common small bores in RTJ, for wellhead, injection and high-pressure hydraulic service.
  • Larger sizes: ASME B16.47 Series A and B above 24 inch, sourced to order.

As a flanges supplier in Qatar shutdown teams use, we keep class 600 to 2500 in the most common bores because a breakdown on an LNG train rarely waits for a forge. If a size or class is not in stock, our Qatar flanges supplier team gives a firm date before you order.

Engineering Selection

Which Flange Class and Facing for Qatar Projects?

This is the question Qatari contractors ask a flanges supplier in Qatar most often, and the answer comes from the line's pressure, temperature and the operator's specification.

  • Class: set by design pressure and temperature under ASME B16.5. Class 150 and 300 cover most utility work; class 600 and above cover most gas and LNG process lines in Qatar's industrial cities.
  • Facing: raised face suits most service up to class 600; RTJ is usual for class 900 and above, and wherever the specification asks for it on hydrocarbon lines; flat face is used against cast iron or lined equipment.
  • Type: weld neck for pressure, temperature cycling and critical lines; slip-on for low-pressure utility work where cost and fit-up speed matter.
  • Material: A105 for normal temperatures, LF2 below minus 29 degrees C, stainless or duplex where the fluid is corrosive.

Not sure? Send the line list and our Qatar flanges supplier team will mark the class, facing, type and material for each line, with the reason. For RTJ flanges, always give the ring number so the groove matches the gasket; any industrial flanges supplier should ask for it.

Quality & Compliance

Certificates, Testing and Mill Origin

As an industrial flanges supplier, we ship every flange with an EN 10204 3.1 certificate naming the forge, country, standard, material and heat code, with 3.2 certificates and third-party witness arranged when a project asks. Each flange is marked with size, class, facing, material and heat code. All flanges come from non-China mills, which is how a flanges supplier in Qatar proves origin on projects with strict material rules. Each export pack also includes a commercial invoice, packing list and certificate of origin. Inspectors are welcome at our Sharjah warehouse before dispatch.

Track Record

Qatar References

[Confirm and replace with authorised references.] Reference 1: [class 600 RTJ flanges for an LNG maintenance contractor at Ras Laffan, year, scope, lead time achieved]. Reference 2: [duplex or stainless flanges for a utility project in Doha, year, scope].

Like any responsible flanges supplier for Qatar, we publish references only with the client's permission and never use an operator's name or logo without proof. Each one names the sector, the flanges supplied, the lead time achieved and whether the documents cleared customs first time, because those are the facts a buyer choosing a flanges supplier in Qatar needs to see.

Complete Piping Packages

Related Flanges Pages

Buying pipe and fittings for the same job? As a supplier of flanges in Qatar, we also stock both. See our pipe and pipe fittings pages for Qatar, our main Flanges page, or our GCC export page for routes to other countries.

Pipe Supplier in Qatar QatarEnergy & Kahramaa approved pipes → Pipe Fittings in Qatar ASME B16.9 & B16.11 fittings → Flanges Main Hub ASME B16.5 & B16.47 tables →
Frequently Asked Questions

Flanges Supplier in Qatar: FAQs

Do you have an office in Qatar?

No. We supply from our stock in Sharjah, UAE, and ship by sea or road.

How long does delivery to Doha take?

Stocked items usually arrive in [5 to 8] working days from order, including Qatar Customs clearance [confirm].

Can you supply QatarEnergy and Kahramaa projects?

We supply contractors working to QatarEnergy and Kahramaa specifications and confirm mill approval line by line [confirm registration status].

Who clears the order through Qatar Customs?

Usually your clearing agent at Hamad Port or Abu Samra; we send all documents in advance [confirm].

Are all your flanges from non-China mills?

Yes. As a flanges supplier in Qatar with a non-China policy, we name the mill and country on every certificate.

Do you supply ring gaskets and stud bolts with RTJ flanges?

Yes, on request; tell us the ring number and we match gaskets and stud bolts to the flanges [confirm].

Can I order flanges in Qatar in small quantities for a repair?

Yes. As a flanges supplier in Qatar buyers use for repairs, we ship single pieces on shared loads and full packages at project rates [confirm].

Do you ship by sea or by road?

Mostly by sea to Hamad Port; road through Saudi Arabia via Abu Samra is used for urgent loads [confirm].

What time can I reach your team?

Our export desk works [8:00 am to 6:00 pm UAE time], which is 7:00 am to 5:00 pm in Doha [confirm].

RFQ & Fast Quote

Request a Flanges Quote for Qatar

Send your list with type, size, class, facing, material and quantity, plus the site address and required date, and mark any urgent lines. As a flanges stockist Qatar contractors can reach in days, our Qatar flanges supplier team will reply with prices, lead times and delivery terms within [confirm] working hours. Call +971 6 533 8167, WhatsApp [confirm number] or email sales@leemaeng.com.

Request a Quote Call +971 6 533 8167

Reviewed by [Engineer name], [Role], Leema Engineering Works. Last reviewed [date].