Industrial Valves Supplier UAE: API 600 Gate, Globe, Ball and Check Valves
Leema Engineering Works is an industrial valves supplier UAE buyers can use for gate, globe, ball and check valves in carbon and stainless steel, built to the API standard for each type [confirm range]. Valves ship from Sharjah and Abu Dhabi with material certificates and pressure test reports, and brands and stock are confirmed per enquiry. This page explains the valve types, standards, pressure classes and what to verify before you commit to a purchase order. Send your valve list with type, size, class and end connection, and our team replies with price, brand options and lead time.
Industrial Valves Supplier UAE at a Glance
A valve starts, stops, throttles or protects a line, and the wrong choice shows up as leakage, wear or a failed shutdown. ASME B16.34 sets the pressure and temperature ratings for steel valves, and the API standards define each valve type. As an industrial valves supplier UAE specifiers consult before the datasheet is final, we flag missing data early. The list below covers the range, and each quotation names the exact standard, class, body material and trim so the valve you receive matches your datasheet and line class.
- Valve types: Gate, globe, ball and check [confirm range]
- Standards: ASME B16.34; API 600, 602, 6D, 598 and 607
- Body materials: A216 WCB, A352 LCC, A351 CF8M; forged A105 and F316
- Sizes: [confirm size range] NPS
- Classes: 150 to 2500 [confirm stocked classes]
- End connections: Flanged, butt-weld, socket weld, threaded
- Brands: Per enquiry [confirm brands supplied]
- Certificates: EN 10204 3.1 material and test report
- Lead time: Confirmed in the quotation
Valve Types We Supply
Four valve families cover most enquiries. Gate valves isolate a line fully open or fully closed and suit long runs where pressure drop must stay low. Globe valves throttle flow and give fine control at the cost of a higher pressure drop. Ball valves give quarter-turn, tight shutoff and are the usual choice for fast isolation. A check valve lets flow pass one way and stops reverse flow without any operator. Gate designs usually have a rising stem and a bolted bonnet for easy inspection, ball designs are floating for smaller sizes and trunnion-mounted for large or high-pressure lines, and check designs include swing, dual plate and piston types. Match the type to the job first, then the standard and body material [confirm stocked types and brands].
- Gate: ASME B16.34; API 602 small bore; used for isolation; typical bodies A216 WCB, CF8M, forged A105
- Globe: API 623 or BS 1873; API 602; used for throttling; typical bodies A216 WCB, CF8M, forged A105
- Ball: API 608; ISO 14313; used for quarter-turn shutoff; typical bodies WCB, LCC, CF8M
- Check: API 594; API 602; used for non-return; typical bodies WCB, CF8M, forged A105
Sizes, Pressure Classes and End Connections
Valves are ordered by nominal size, pressure class and end connection. ASME B16.34 gives the pressure and temperature rating by class and material, and ASME B16.10 gives face-to-face length so a new valve fits the gap left by an old one. Flanged and butt-weld end valves suit most process lines, such as steel gate valves to API 600, while socket weld and threaded ends suit small bore pipework, usually API 602 forged steel valves.
Flanged ends follow ASME B16.5, so match the class and facing to the mating flange on our flanges page. Stocked sizes span [confirm] to [confirm] NPS in classes [confirm]; larger or higher-class valves are quoted from the manufacturer. For pipeline valves, also tell us the bore, the required end-to-end length and any pigging needs, because these change which valve fits.
A216 WCB valves are the usual carbon steel body for water, oil and gas at moderate temperatures, A352 LCC covers low temperature, and CF8M stainless steel valves suit corrosive fluids as the cast equivalent of 316. State the operator type if you need a gearbox or actuator, because that changes the quotation.
Where Industrial Valves Are Used
Valves sit wherever fluid is controlled. Oil and gas: wellhead tie-ins, pipelines, process units and terminals, with API 6D pipeline valves on transmission lines, see our oil and gas page. Power generation: steam, feedwater and cooling-water isolation, see our power generation page. Marine and shipbuilding: ballast, fire and cooling systems, see our marine page. Water, chemical and utility plants: process and service lines where chlorides, heat or pressure set the body material.
Plants sourcing from an industrial valves supplier UAE wide usually keep one approved valve list per site, so matching the existing specification matters. Fabrication yards and EPC contractors also buy valves with piping packages, so one enquiry can cover pipe, fittings, flanges and valves with matching documents. In every sector the line class, not the nearest stock item, decides the valve.
Isolate, Throttle or Stop Reverse Flow: Which Valve Do You Need?
Decide by function before size. If the valve will sit open or closed, choose gate valves for lower cost and long lines, or full bore ball valves where tight shutoff and quick closing matter; the full bore keeps pressure drop low and, in pipeline service, lets a pig pass. If the valve must regulate flow, choose a globe valve, because a gate left partly open vibrates and erodes its seat. If flow must never reverse, such as at a pump outlet, choose a check valve, and pick swing check valves for general lines or a dual plate wafer type where space and weight are tight.
Then set the class from the design pressure and temperature, and the body material from the fluid. Fire-safe design matters on hydrocarbon lines, so ask for fire-safe API 607 valves where your specification calls for fire type testing. For floating or trunnion ball designs, check the size and class, because large high-pressure designs need trunnion mounting for reasonable operating torque. Send the line class and our engineers will check the valve against it before you order.
Certificates, Testing and Valve Origin
A valve is only as good as its test record. Each valve ships with an EN 10204 3.1 material certificate for the body and with its pressure test report, and we can request 3.2 where a third party must witness. API 598 valve testing covers the shell test, the backseat test and the seat test before dispatch, and your inspector can witness it at our stores. Positive material identification on request confirms the alloy of a stainless body, and fire type-test certificates are supplied for fire-safe designs.
Together these valve test certificates let you trace each valve to its heat and test. Any industrial valves supplier UAE operators approve should supply these records with the delivery. Seat materials, trim and bolting grades are stated on the quotation, so no substitution is made without your written approval. Country of manufacture appears on the documents, and our Quality and Approvals page describes our inspection routine.
Industrial Valves Supplier UAE: Stock and Lead Time
We hold valves at our Sharjah and Abu Dhabi stores [confirm types, sizes and classes by site]. Anything outside stock comes from the manufacturer, and the supply route sets the lead time stated in your quotation. Teams planning a shutdown should ask early. Stock is checked before anything else, and a factory order is flagged as soon as it becomes unavoidable. Overseas shipments leave with export documents and test records.
Industrial Valves Supplier UAE FAQs
What does API 6D cover? +
It covers pipeline and piping valves, including ball, gate, plug and check types, for transmission and terminal lines. It adds design, testing and documentation requirements beyond general-purpose valves.
Should I choose a full bore or reduced bore ball valve? +
Full bore designs cause almost no pressure drop and allow pigging on pipeline service. Reduced bore valves are smaller and cheaper, and suit lines where some pressure loss is acceptable.
What is a fire-safe valve? +
It is a valve whose design has passed a fire type test, such as API 607 or ISO 10497, so it keeps leakage within limits after the seats burn. Ask for the test certificate.
What tests does a valve receive before dispatch? +
Under API 598, a valve gets a shell test, a backseat test and a seat test. Soft-seated valves also get a low-pressure test. Request the report with the order, and ask for the test pressure and hold time, which show whether the test was done to the standard.
Which check valve type should I use? +
Swing types suit general lines with moderate velocity. Dual plate wafer types save weight and space. Piston types suit small bore lines and are covered by API 602.
What should I check before buying from an industrial valves supplier UAE buyers can verify? +
Ask for the datasheet match, the standard on the nameplate, the material certificate and the test report, and ask which manufacturer built the valve, because a nameplate without a matching certificate proves little.
Request a Valve Quote
Upload your BOQ or MTO with valve type, size, class, end connection and quantity. Our Sharjah and Abu Dhabi teams reply with price, brand options and lead time within [response time]. Call +971 6 533 8167 or email sales@leemaeng.com, or message us on WhatsApp [number]. Mention the line class or specification and we will check the valve against it.
Reviewed by [Engineer name], last reviewed 16 October 2026.